Application of wave drying equipment : 

1.Drying of food and agricultural by-products 

Microwave drying equipment is widely used in the drying and sterilization of rice flour, rice, shelled peanuts, oatmeal, raw oatmeal, soybean products, instant noodles, potato chips, dried fish, shrimp, salted duck, soybean, momordica grosvenori, rose, osmanthus, pepper, pepper, bean curd and so on. 

2.Drying of pet feed 

The microwave drying and sterilization equipment for pet feed can be used for the drying of granular and powdery materials such as bulk fish bait, bird feed, fish feed, pig feed, etc. It can also be used for the drying and sterilization of bagged fish bait, bird feed, fish feed, pig feed and other materials. 

3, the drying of the pharmaceutical industry 

The application of microwave drying equipment in the pharmaceutical industry is mainly in the following aspects : drying and sterilization of pharmaceutical products such as powder, granule, flake and pill, rapid drying, insecticidal and sterilization of Chinese herbal medicine. 

4. The drying of wood board. 

The microwave wood drying equipment can uniformly and deeply dry the 1-6 cm thick wood board. It only takes more than ten minutes to dry, and does not crack and deform small, while eliminating the eggs and larvae inside the wood ; it can also be used for the curing treatment of plywood or plywood bonding and the drying, mildew and sterilization of bamboo wood crafts. 

5, a variety of chemical pigments, dyes, paste material pre-molding after drying 

Lithium battery materials ( lithium iron phosphate, etc. ), refractory materials, black silicon carbide powder, silicon carbide powder, green silicon carbide powder, light calcium carbonate, nano-scale ultrafine calcium carbonate, magnesium carbonate, aluminum hydroxide, strontium carbonate, barium carbonate, barium sulfate, potassium sulfate, nickel sulfate, lithium hydroxide, nickel hydroxide, barium chloride, copper chloride, calcium chloride, lithium carbonate, zinc sulfate, silicon dioxide, lithium hydroxide, lithium carbonate, manganese ore, glass fiber, starch cobalt oxalate, cellulose ( such as hydroxyethyl cellulose, carboxymethyl cellulose, etc. ), mannitol, nickel hydroxide, lithium cobalt oxide, graphite, silicon carbide, calcium chloride dihydrate, activated carbon, zirconium oxychloride, zirconium oxychloride, zirconium oxychloride, zirconium hydroxide, zirconium carbonate, zirconium sulfate, ammonium carbonate, zirconium acid, potassium carbonate, zirconium oxide cross-linked ink dry ink, water cross-linked ink. 

6. Drying of paper tube and pulp products 

7. Shaping and drying of ceramics and honeycomb ceramics 

8, latex rubber, textiles, etc. 

The above is only part of the application for reference only, welcome to sample test. 

Advantages of microwave drying equipment : 

1.Energy saving : Microwave directly acts on the material, and the material is heated inside and outside at the same time, so there is no additional heat loss. The air in the cavity and the corresponding container will not heat up, so the thermal efficiency is high, and the production environment is also significantly improved. Compared with the traditional electric heating, it can save 30 % of electricity. 

2.High efficiency, short time : Because microwave heating does not require heat conduction process, so the microwave penetrates the object from different directions, into the interior of the object, from the inside to the outside, so that the material in a very short period of time to achieve uniform heating, effectively shortening the heating time. 

3.Easy to control : Compared with the conventional method, the microwave operation is simple, and the power is adjustable, and the transmission speed is also adjustable. The infrared temperature tester is configured to realize automatic temperature adjustment.

Technical parameters : 

Input power : three-phase five-wire 380V ± 10 %, 50Hz ± 1 % 

2 、 Output microwave power : Custom power 

3. Microwave frequency : 2450MHz ± 50Hz 

4. Inlet and outlet height : 50-200mm. 

5.Transmission band width : 600-2000mm 

6.Transmission speed : 0-10m / min ( variable frequency adjustable ) 

7.Size ( length × width × height ) : Customized according to the size of the equipment and site requirements. 

8. Working environment : 0 ~ 40 °C, relative humidity ≤ 80 %. 

9, in line with GB 10436-1989 workplace microwave radiation health standards microwave leakage ≤ 5mw / cm2. 

10, in line with GB / 5226.1-2002 mechanical safety, mechanical and electrical equipment